Screen door up and attacked my Orient GMT!

Screen door up and attacked my Orient GMT!

Postby Lost » April 11th 2019, 7:00pm

So damn bummed. Just noticed before going to bed that my watch took a hit. Worn it every day for 2.5 years. Pulled the stem (or snapped the sumbitch) right out of the watch. Went outside and actually found it, but not before someone stepped on it. Picture says it all.
Anyway, I used you all to pick out the watch, now need your advice on fixing it.
Take it to the local watch repair joint in Syracuse?
See if Orient USA would fix it?

I bought a Samsung S3 a while ago, and quickly got tired of it. Now it’s on the charger. I am gonna miss my buddy.
You do not have the required permissions to view the files attached to this post.
User avatar
Lost
Senior Member & WIS
 
Posts: 100
Joined: September 5th 2016, 6:58pm

Re: Screen door up and attacked my Orient GMT!

Postby artman » April 11th 2019, 7:12pm

That really sucks to happen to such a nice watch. I haven't a clue how to get that fixed, but hopefully the others chime in soon. Good luck man.
User avatar
artman
Master of Time
 
Posts: 2582
Joined: February 8th 2015, 5:42pm

Re: Screen door up and attacked my Orient GMT!

Postby AlbertaTime » April 11th 2019, 7:43pm

I'd get hold of Orient USA and at least ask about repair. Worst case is probably a movement replacement, and it's a beautiful watch.
Curator: Alberta Museum of Chinese Horology in Peace River

"That stone buddha deserves all the birdshit it gets. I wave my skinny arms like a tall flower in the wind." Ikkyu
User avatar
AlbertaTime
Master of Time
 
Posts: 3427
Joined: October 13th 2010, 10:00pm
Location: Peace River, Alberta

Re: Screen door up and attacked my Orient GMT!

Postby Racer-X » April 11th 2019, 8:17pm

Maybe just needs a new stem. I'd try a local watchmaker first. That said, I had a very reasonable quote some years ago from Orient USA.
User avatar
Racer-X
Senior Member & WIS
 
Posts: 5805
Joined: June 11th 2011, 10:00pm

Re: Screen door up and attacked my Orient GMT!

Postby bobbee » April 11th 2019, 10:04pm

That looks like it needs a new crown and stem, as the stem seat inside the crown is bent.
If you know the watch's calibre, a new stem and crown would be easy to get.
"O' cruel fate, to be thusly boned! Ask not for whom the bone bones, it bones for thee." ~ Bender Bending Rodriguez

Image
User avatar
bobbee
Master of Time
 
Posts: 2585
Joined: November 30th 2016, 1:01am

Re: Screen door up and attacked my Orient GMT!

Postby conjurer » April 11th 2019, 10:22pm

Don't worry about it, Mr. Lost. All is not lost(!). Check with the local watch guy first; OUSA are a bunch of clowns. If he can't handle it, tighten up your butt cheeks and send it to OUSA, and they should get it sorted without further fucking it up.
Cream rises to the top while jackoffs only leave puddles of rancid jizz.


--Temerity, regarding Bazinga!.
User avatar
conjurer
ASSHAT & Master of Time
 
Posts: 29382
Joined: July 13th 2010, 10:00pm

Re: Screen door up and attacked my Orient GMT!

Postby Falstaff » April 12th 2019, 5:21am

A relatively easy and inexpensive fix. If your local boy can't source Orient parts there are plenty of non-OEM crowns, stems and tubes available in all sizes. Otto Frei is a good source.
"See the Winter Boys drinking heavy water from a stone - Bye bye Empire, empire bye bye...."
User avatar
Falstaff
Watchlord WIS
 
Posts: 7369
Joined: August 31st 2010, 10:00pm

Re: Screen door up and attacked my Orient GMT!

Postby TemerityB » April 12th 2019, 9:34am

Yeah, I'd think you can fix that - and I'd be upset if you didn't at least try. From your writing, I can tell that particular watch means a lot to you. Don't even think about NOT fixing it. I'd think a watchmaker could repair it and not for a king's ransom.
I bought a dive watch from them that literally had “dive” in the name. The instructions said not to dive with it - it was only meant to LOOK like a dive watch. It was also fast by more that a minute per day. Garbage. Never again. - IWG buyer on Reddit
User avatar
TemerityB
ASSHAT
 
Posts: 15422
Joined: June 12th 2010, 10:00pm
Location: New York City

Re: Screen door up and attacked my Orient GMT!

Postby Lost » April 12th 2019, 2:21pm

Just got an email back from Orient America. They guessed 65 bucks plus shipping both ways. Have yet to call the local jewelry joint, but for that money might just let the people who have seen it before do it. If I knew I could get the exact part from a reliable vendor, I would take a shot at myself. I do stuff like electronics repair (even surface mount stuff) once in a while, but I do know I could woof it even more also. I do have a basic watch repair kit with the vice system etc.

it settles on about -5 seconds a day. Would/could/should I ask ‘em to bump the regulator thingy up a scosch?

Thanks folks.

EDIT: Just talked to the local guys, who ship it out (they sort of intimated New York City somewhere). I dunno, maybe just let them do it.... They take care of all the shipping etc.
User avatar
Lost
Senior Member & WIS
 
Posts: 100
Joined: September 5th 2016, 6:58pm

Re: Screen door up and attacked my Orient GMT!

Postby foghorn » April 12th 2019, 2:44pm

-5 secs a day is a great rate. If you ask them to adjust it it might comback at + 7 secs a day. I doubt that they'll fidddle with it until it's a certain rate. Right now it's well within spec so I'd let it go. Hell, if you set it a minute fast you can wear it for 24 days and still be within a minute of NIST time.
Image
User avatar
foghorn
Founding Member & Master of Time
 
Posts: 19011
Joined: December 18th 2009, 11:00pm

Re: Screen door up and attacked my Orient GMT!

Postby conjurer » April 12th 2019, 3:05pm

foghorn wrote:-5 secs a day is a great rate. If you ask them to adjust it it might comback at + 7 secs a day. I doubt that they'll fidddle with it until it's a certain rate. Right now it's well within spec so I'd let it go. Hell, if you set it a minute fast you can wear it for 24 days and still be within a minute of NIST time.


I agree with the Rewstar--mark this day on your calendars!!--on this one. I wouldn't fuck with it, either.
Cream rises to the top while jackoffs only leave puddles of rancid jizz.


--Temerity, regarding Bazinga!.
User avatar
conjurer
ASSHAT & Master of Time
 
Posts: 29382
Joined: July 13th 2010, 10:00pm

Re: Screen door up and attacked my Orient GMT!

Postby biglove » April 13th 2019, 8:25am

For $65 I would send it to Orient and let them fix it. Have sent one to Orient-Japan and was fixed perfectly.
"There's not a pill you can take; there's not a class you can go to. Stupid is forever."- Ron White
Image
User avatar
biglove
Watchlord WIS
 
Posts: 12034
Joined: October 27th 2013, 9:18am
Location: Deep South

Re: Screen door up and attacked my Orient GMT!

Postby Lost » June 20th 2019, 9:16am

Well, I picked. the wrong folks to fix my watch. Picked it up at the shop (they sent it to NYC for repair somewhere), didn’t look it over real close, and drove home. At a light I decided to try and set the GMT hand, and I’m all WTF?? What friggin bone head calls himself a watch repair person and puts the somebitch together like this?? I bout pee’d my pants I was so pissed.
You do not have the required permissions to view the files attached to this post.
User avatar
Lost
Senior Member & WIS
 
Posts: 100
Joined: September 5th 2016, 6:58pm

Re: Screen door up and attacked my Orient GMT!

Postby conjurer » June 20th 2019, 9:19am

What's wrong with it?
Cream rises to the top while jackoffs only leave puddles of rancid jizz.


--Temerity, regarding Bazinga!.
User avatar
conjurer
ASSHAT & Master of Time
 
Posts: 29382
Joined: July 13th 2010, 10:00pm

Re: Screen door up and attacked my Orient GMT!

Postby Lost » June 20th 2019, 9:26am

conjurer wrote:What's wrong with it?

Check out the GMT chapter ring. 24 should be at the top.
User avatar
Lost
Senior Member & WIS
 
Posts: 100
Joined: September 5th 2016, 6:58pm

Re: Screen door up and attacked my Orient GMT!

Postby conjurer » June 20th 2019, 9:28am

Lost wrote:
conjurer wrote:What's wrong with it?

Check out the GMT chapter ring. 24 should be at the top.


Dang. That blows.
Cream rises to the top while jackoffs only leave puddles of rancid jizz.


--Temerity, regarding Bazinga!.
User avatar
conjurer
ASSHAT & Master of Time
 
Posts: 29382
Joined: July 13th 2010, 10:00pm

Re: Screen door up and attacked my Orient GMT!

Postby Falstaff » June 20th 2019, 9:40am

Sweet jeebus! That really puts the FU in FUBAR.
"See the Winter Boys drinking heavy water from a stone - Bye bye Empire, empire bye bye...."
User avatar
Falstaff
Watchlord WIS
 
Posts: 7369
Joined: August 31st 2010, 10:00pm

Re: Screen door up and attacked my Orient GMT!

Postby biglove » June 20th 2019, 1:08pm

That's fucked up.
"There's not a pill you can take; there's not a class you can go to. Stupid is forever."- Ron White
Image
User avatar
biglove
Watchlord WIS
 
Posts: 12034
Joined: October 27th 2013, 9:18am
Location: Deep South

Re: Screen door up and attacked my Orient GMT!

Postby Racer-X » June 20th 2019, 3:05pm

“Put the six at six o’clock.”
User avatar
Racer-X
Senior Member & WIS
 
Posts: 5805
Joined: June 11th 2011, 10:00pm

Re: Screen door up and attacked my Orient GMT!

Postby artman » June 20th 2019, 3:24pm

I"d be pissed too. Send it back! Bastards.
User avatar
artman
Master of Time
 
Posts: 2582
Joined: February 8th 2015, 5:42pm

Re: Screen door up and attacked my Orient GMT!

Postby Hawk » June 20th 2019, 3:51pm

conjurer wrote:What's wrong with it?


I had the same problem with picking up on it. No doubt a function of the Ball worldtimer with adjustable chapter ring. Maybe NYC thought he was pounding together that specific Ball?

That's my story and I'm sticking to it.
And the fact I'm still living rent free in his head makes me grin and giggle.
...bobbee
User avatar
Hawk
ASSHAT
 
Posts: 9355
Joined: October 8th 2010, 10:00pm
Location: Orlando, FL


Return to General Watch talk

Who is online

Users browsing this forum: No registered users and 4 guests