Ronda Caliber Z60

This forum is for Horology and the art of watchmaking

Ronda Caliber Z60

Postby koimaster » March 7th 2019, 10:13am

This is the Ronda caliber Z60 quartz watch movement. it is part of the xtratech line. There are two versions of this caliber: Swiss made and Swiss parts. Both versions are nickel plated with zero jewels. This movement was announced in 2013.

In Ronda’s Own words:

Repairable movement with metal main plate and bridges.


According to Ronda, the caliber Z60 should keep time within -10/+20 seconds per month with an operating temperature of 0 to 50 degrees Celsius.

Power Reserve

A fresh battery (cell 395) should last for 50 months. This caliber has a power saving (hacking) function that stops the second hand when the crown is pulled out. Doing this will reduce power consumption by about 70%. Always remember that leaving the chronograph feature running will drain the battery faster.

Stem Removal

To remove the crown/stem, find the hole with the arrow. While the crown is in position 0, pressing this with your tweezers or other tool will allow the stem be unlocked so you can pull it out.

Replacement Prices

At the time of this post, replacement prices for this watch movement were found in the range of $39.95-42.95 USD for the Swiss made version. The Swiss parts version was about half the price at $22.95.

Resetting the Chronograph to Zero

Sometimes the central second hand can reset incorrectly to a position other than 12:00 or zero. This is especially common after a battery replacement. If your watch experiences this, you can fix it (as long as the issue is not being misaligned due to being loose).
•Pull out the crown to time setting mode (position 3)
•Push and hold the top and bottom buttons at the same time for about 2 seconds. The central seconds hand will rotate around the dial, this means resetting mode is activated.
•Use the top pusher to adjust the central second hand. Push the button to advance the hand by one second, or push and hold to advance the hand faster.
•Use the bottom button the adjust the 30 minute counter.
•Press the crown back in. ... fGvfbgyjfg


You do not have the required permissions to view the files attached to this post.


“Your heart was warm and happy

With the lilt of Irish laughter

Every day and in every way

Now forever and ever after."
User avatar
Posts: 37298
Joined: December 16th 2009, 11:00pm
Location: Oregon

Return to The Art of Time

Who is online

Users browsing this forum: No registered users and 1 guest